Eneroil can provide 50 barrel Batch Mixers
The 50 bbl Batch Mixer, comes with a diesel driven hydraulic power pack and is fitted with variable speed controls to allow fine tuning of the agitators and centrifugal pumps to run at the desired speed to achieve the job requirements.
5" Suction X 4" discharge
capacity - 50 bbl
Material - IS/ASTM/ASA
Covered top, with one manhole for access
Flanges 150# Forged
Fasteners 193 B7
Suction Time 5"
Discharge line 4"
Fill line 4"
Bulk cement feed line 4"
Butterfly Valves Audco/Virgo/Peco
Pipe End Unions Figure 200/206
Unwelded pipe joints on unit : Victaulic Schedule 80
Height 12 Ft. maximum
Width 8 Ft. 6 inch
Weight 20,000 LB total
The batch tank is fitted with an eductor assembly and mixing hopper to aid the mixing of chemicals and cement. The eductor assembly has an integral jet assembly which provides the necessary suction force to properly mix the slurry.
The eductor assembly, which sits on top of the batch tank, accommodates a 4 inch mixing hopper and 2 inch water line to allow addition of chemicals and cement to achieve the correct slurry density while circulating and agitating.
If required ENEROIL is able to also provide 100 bbls Batch mixers (Twin 50 bbl batch mixers). The specification of the twin 50 bbl batch mixer is similar to the detailed specifications of the single 50 bbl batch mixer.