SPIRAL VANE THERMOPLASTIC CENTRALIZER

Model : S19

Spiral Vane Thermoplastic Centralizer

Eneroil's spiral vane thermoplastic centralizers are manufactured using engineered material and are designed for the maximum durability, drag, and friction downhole achievable in a centralizer. Additionally, these centralizers have lower friction factors, a rotational torque reduction, and increased abrasion resistance for a maximum stand-off. Spiral vanes help enhance hole-cleaning by using a maximised flow-by area. The vanes overlap the entire 360° open-hole circumference, which creates a vortex motion to increase fluid velocity with direction. Even without rotation, the vanes are able to induce turbulent flows for an improved cutting and filter cake removal.

Eneroil’s thermoplastic centralizers are a one-piece construction of superior-quality polymer, with optimum tensile and yield strengths, and are able to withstand high well-bore temperatures while providing a maximum horizontal stand- off.

Performance Features

  • Eneroil’s spiral vane thermoplastic centralizers provide high impact resistance as well as chemical and high temperature resistance.
  • The extra length of the vanes provides maximum centralisation, a high stand-off, and increased annular turbulence.
  • Its high performance characteristics are combined with a quick and effortless installation.

Options

  • Eneroil’s thermoplastic centralizers are available with a swaged mild-steel ring both on the top and the bottom end
  • Available in sizes 2 ⅞" to 13 ⅜”
  • Special sizes or combination can be made available on request

Recommended For Use With

  • Slip-On Stop Collar with Set Screws with one side Beveled – S-65
TOP